BlueBomb
It is strongly advised against using any video guide for hacking your Wii mini console, as there is an extremely large chance of bricking it.
If you need help with anything regarding this tutorial, please join the Wii mini Hacking Discord server (recommended)
BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini’s Bluetooth libraries. Although it is the only exploit that works for the Wii mini, BlueBomb can run on the original Wii as well. This exploit also enables recovery from certain bricks, such as a banner brick.
For the original Wii, we do not recommend using BlueBomb if you intend to install the Homebrew Channel and BootMii, as there are more convenient exploits available.
Section I - What you need
- A Linux machine
- A Virtual Machine may work, but it is not recommended due to its complexity in getting Bluetooth passthrough working. If possible, please use a LiveUSB as described below.
- If you have a Raspberry Pi, you can use that instead as it most likely has Linux installed already.
- Windows Subsystem for Linux or a Chromebook running Linux mode will not work as they don’t have direct access to the Bluetooth adapter or USB ports.
- If you do not have Linux, Ubuntu is the most user-friendly option and can be ran on computers running Windows or Mac.
- 32-bit devices will require Ubuntu 16.04.
- For 64-bit devices it is recommended to use the LTS edition due to its stability, but the latest release works as well.
- You can flash a Linux Live environment to a USB flash drive instead of installing it to your computer.
- A Bluetooth adapter.
- An internal Bluetooth adapter will work.
- If you do not have one, make sure to get one compatible with Linux.
- A USB flash drive formatted as FAT32.
- This cannot be the same flash drive used for your Linux Machine.
Section II - Performing the exploit
- Download the HackMii installer from the BootMii website.
- (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
- Extract it and place the
boot.elf
file in your flash drive.- (Even for a Wii mini, bootmini.elf will not work, its purpose is entirely different and unrelated. Use boot.elf in all cases).
- Connect the flash drive to the console. For a Wii mini, the USB port is on the back. For a normal Wii, use the bottom port. (or the right port if it’s upright).
- Turn on your console and navigate to the settings menu. On the top right corner you will see a 4-character code like the one in the picture below. This code is your Wii Menu version, take a note of this as you will need it later. Afterwards, turn your console off.
- Start your Linux distro, and ensure you are connected to the internet.
- Open the Terminal
- Run the following commands:
wget https://wii.guide/assets/files/bluebomb-helper.sh chmod +x bluebomb-helper.sh ./bluebomb-helper.sh
- The helper will then download the required files, and ask for information about your console.
- If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (
U
for USA andE
for PAL models). - If you have selected a Wii you will be asked to provide your Wii Menu Version (What you determined in step 4)
- If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (
- Turn on your console and do not connect any Wii Remotes.
- Press the Sync button repeatedly until the terminal shows
got connection handle
. This could take numerous attempts, so don’t give up.
Make sure that the console is close to the computer running the exploit, ideally it should be less than 3 feet.
The console should now boot to the HackMii installer. You can now shut down your Linux computer if you are not planning to use it later.
If using a Wii, proceed to installing the Homebrew Channel and BootMii
If using a Wii mini, proceed to installing the Homebrew Channel