Dumping Wii/GameCube games
This guide covers dumping GameCube or Wii game discs. You can either dump directly to an SD card or USB drive, or over the local network.
Dumping a Disc to SD/USB (CleanRip)
Requirements
- An SD card or USB drive with at least 4.7 GB of free space (8.5 GB if dumping a dual layer disc).
- CleanRip
Instructions
If you are dumping one of the 13 games on this list, set Dual Layer
in Step 6 to Yes
.
- Power off your console.
- Insert your SD card or USB drive into your computer.
- Copy the
apps
folder from the CleanRip.zip
to the root of your SD card or USB drive. - Reinsert your SD card or USB drive into your console.
- Power on your console.
- Launch the Homebrew Channel.
- Launch CleanRip from the list of homebrew.
-
Select your device that you will be dumping the game to - a USB device or SD card.
- When prompted, select
Yes
to download the redump.org DAT files.- This is required to ensure that the resulting dumps are clean/accurate.
You may get an exception error if you do this. If so, simply skip and verify your dump on Dolphin Emulator if needed.
-
Insert the game disc you would like to dump.
-
Set the settings as shown on the screen below, while verifying if your game disc is dual layer or not.
- Press A to start dumping the disc.
- This process can take quite some time, since it will dump the full 4.7 GB disc contents (8.5 GB for dual layer discs).
- Proceed to joining PART files.
Dumping a Disc over LAN (Wii DVD Dumper)
Requirements
- A Windows/macOS/Linux PC with an internet connection
- DVD Dump Tool
Instructions
Download speeds will be slow due to limitations in the network hardware of the Wii, but it remains a valid solution if you are willing to be patient.
Your Wii and your computer must be connected to the same local network.
- Copy the
DVDDumpTool
folder from the DVDDumpTool.zip
to the root of your SD card or USB drive. - Reinsert your SD card or USB drive into your console.
- Power on your console.
- Launch the Homebrew Channel.
- Launch DVD Dump Tool from the list of homebrew.
- Press right on the D-pad, then press A.
-
Choose the disc that you want to copy (The options are:
GameCube Disc
,Wii Single-Layer Disc
,Wii Dual-Layer Disc
) and press “A” - Insert the game disc into your Wii.
- If it is already inserted, eject and reinsert the disc.
-
Select the proper disc type.
-
Press any button to begin the dumping process.
- Remember or write down your Wii’s URL (IP address).
-
On your computer, open the browser, go to your address bar and enter the Wii URL.
- Click on
Click here to download XXXX.iso
. - Proceed to joining PART files.
Joining PART files on a FAT32 device
If you dumped the disc (regardless if it was to a PC or Wii) on a FAT32 formatted device, you should have gotten at least two files that end with .partX.iso
. They need to be joined.
Windows
- Copy the files that share the same name and end with
.partX.iso
into an empty folder on your computer. - In this folder, click the address bar in Windows Explorer and copy its PATH.
- Open a PowerShell or Windows Terminal window.
- Run
cd [PATH]
. - Type
copy /b *.part?.iso game.iso
and press enter. - Wait until the merging process finishes.
- It should end with the terminal outputting
1 file(s) copied
.
- It should end with the terminal outputting
macOS/Linux
- Copy the files that share the same name and end with
.partX.iso
into an empty folder on your computer. - Open up a Terminal.
- Run
cd [PATH]
, replacing [PATH] with the folder path to your.partX.iso
files. - Use the following command as is:
cat \*.part?.iso > game.iso
. - Wait until the merging process finishes.
To organize the games on your drive properly, you can use Wii Backup Manager.